SW20034IB66 SWD013 Wi-Fi 6E/7 Bluetooth SMD Antenna

Product Overview: The SW20034IB66 (SWD013) is a high-performance, ultra-compact SMD Multi-Band antenna designed for seamless integration into next-generation IoT and cellular devices. Unlike standard cellular antennas, this advanced model combines full 2G/3G/4G LTE capabilities with comprehensive GNSS positioning support (including GPS, GLONASS, GALILEO, and BEIDOU) in a single surface-mount component.

Key Features:

• All-in-One Cellular & Navigation: Combines 2G/3G/4G LTE mobile networks with GNSS (GPS/GLONASS) satellite positioning.

• Ultra-Compact SMD Design: Standardized surface-mount technology (35.0 x 8.5 x 3.0 mm) for dense and space-saving PCB layouts.

• High Efficiency Setup: Delivers outstanding efficiency of up to 64.5% on GNSS bands and up to 63.8% on high-frequency cellular bands.

• Multi-Device Versatility: Optimized for LTE applications including MIMO systems, NB-IoT, and Cat M1 networks.

• Rugged & Durable: Fully operational in extreme industrial environments from -40°C to +85°C.

Technical Specifications:

• Part Number (PN): SW20034IB66 / SWD013

• Mounting Type: SMD (Surface Mount Device)

• Dimensions: 35.0 (L) x 8.5 (W) x 3.0 (H) mm

• Material: High-grade PCB

• Supported Standards: 4G / 3G / 2G / NB-IoT / CAT M1 / GNSS (GPS, GLONASS, GALILEO, BEIDOU)

• Frequency Ranges:

  • Cellular Low: 698 – 960 MHz

  • GNSS / GPS Bands: 1559 MHz / 1575.42 MHz / 1602 MHz

  • Cellular High: 1710 – 2690 MHz

• Peak Gain:

  • -2.9 ~ 1.5 dBi (698–960 MHz)

  • 2.7 ~ 3.5 dBi (GNSS Bands)

  • -3.7 ~ 2.6 dBi (1710–2690 MHz)

• Impedance: 50 Ohm

• Radiation Pattern: Omni-Directional

• Polarization: Linear

• Max Input Power: 5W

• Operating Temperature: -40°C to +85°C

Applications: Perfect for space-constrained, smart applications including:

• Wearable devices & portable electronics

• Smart tracking, fleet management, and remote monitoring

• NB-IoT & Cat M1 industrial network routers

• Femto/Pico micro base stations

Installation & Layout Notes: This antenna requires a specialized clearance area and matching network on the host PCB to ensure maximum performance:

• PCB Placement: It is highly recommended to place the antenna in the corner of your host PCB.

• Ground Clearance: Maintain a minimum clearance gap (D) of >= 3 mm along the edge of the antenna placement to the ground plane. A clearance gap (E) of >= 15 mm is required to surrounding traces/ground.

• Matching Circuit: The layout should accommodate up to a 6-component matching circuit (typically using a 27nH inductor at E1, a 3.9pF capacitor at E2, and a 15nH inductor at E6) close to the feed line for precise frequency tuning.

• Soldering: Designed for Lead-Free (PB-Free) SMT reflow soldering with a peak temperature profile of 260°C max (for 10 seconds max).

Frequently Asked Questions: Q1: What networks and positioning systems is this antenna compatible with? A1: It supports global cellular networks (4G LTE, 3G, 2G, NB-IoT, Cat M1) and simultaneously acts as a high-efficiency receiver for all major satellite navigation systems (GPS, GLONASS, Galileo, Beidou).

Q2: Does the antenna have 16 active pins? A2: No. While the antenna features 16 pads for surface mounting, only Pin 3 (Feed) and Pin 4 (Return/GND) are electrically active. The remaining 14 pins are strictly dedicated to mechanical strength and anchoring on the PCB.

Inquire for custom integration options, matching network consulting, or bulk wholesale quantity pricing.